Utility PV includes a variety of application scenarios such as flat land, mountain, hills, agricultural photovoltaic, desert treatment, soil restoration, water surface, etc. The capacity of FEEO equipment is generally above 20MW, and it can operate stably and efficiently under harsh operating environments such as high temperature, high altitude, wind and sand, salt spray and low temperature.
MORE
Max32A and 1500V Available in 2 to 4 Pole, application in the distribution box TUV certificated Working Temperature: Full efficiency between -25℃ ~ 70℃ 5 years guarantee certificate ... Children or Un-Authorized access Operator Independent trigger Ratchet Switching and Knife Edge Self Cleaning Contact Mechanism
MORE
FPV-125 high breaking capacity circuit breaker is specially for solar PV system. The current is form 63A to 125A and voltage up to 550VDC. Standard according to IEC/EN60947-2.
MORE
FEEO FDS-32 series of DC FUSE is designed for solar system. Fuse holder(fuse base) with indicator light is used for 1A-32Amp,1000VDC.
MORE
Type 1+2 DC Surge Protective Device Application: FSP-D40 is a Type 1+2 surge protector specially designed for photovoltaic power generation.
MORE
FEEO 2P FSP-D40 series of DC Surge Arrester(DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC,even can be customized to 12VDC,24VDC,48VDC.
MORE
fuse features light in weight, small in size, low in power loss and high in breaking capacity. This products has been widely used in overload and short circuit protection of electric installation. This product conforms to ICE 60269 standard with all of the rating at the world advanced level.
MORE
Product Description: FDIS-NHV series enclosure Isolator switch applied to circuits of DC 50Hz/60Hz with working voltage up to 1500V and rated working current up to 32A.
MORE
FEEO FDIS-32 series of DC ISOLATOR(DISCONNECTOR)with Connector is designed for out door solar system. The protection level is IP66. Rated Current from 16A-32Amp,can be customized to 58Amp. Rated voltage:1000VDC.
MORE
FEEO research and development FDH photovoltaic dc isolator is mainly used solar power distribution system, namely pv junction box, etc. direct current electrical equipment. Rated voltage 1200 VDC, rated current 63 A,
MORE
FPIS Series DC Isolator Switch is designed with high standard IEC/EN 60947-3. It has certification of TUV CB SAA and CE. It is used under high current. It has double breakpoint arc extinguishing can effectively improve the breaking ability.
MORE
FEEO FPVM series of DC Moulded Case Circuit Breaker(DC MCCB) is designed for solar system with bigger current and higher breaking capacity. Rated current of 2Poles contains 100A,125A,200A,250A. Rated voltage of 2Poles is 550VDC。
MORE
FEEO FPVM series of DC Moulded Case Circuit Breaker(DC MCCB) is designed for solar system with bigger current and higher breaking capacity. Rated current of 4Poles contains 125A,250A,400A,630A,800A. Rated voltage of 4Poles is 1000VDC,even can be customized to 1200VDC.
MORE
FPVM series of DC Moulded Case Circuit Breaker(DC MCCB) is designed for solar system with bigger current and higher breaking capacity. Rated current of 2Poles contains 100A,125A,200A,250A. Rated voltage of 2Poles is 550VDC.
MORE
FEEO FPV-63 series of DC Mini Circuit Breaker(DC MCB) is designed for solar system. Rated current contains 6A,10A,16A,20A,25A,32A,40A,50A,63A. Rated voltage of 1Pole can reach 250VDC.
MORE
FEEO FPV-63 series of DC Mini Circuit Breaker(DC MCB) is designed for solar system. Rated current contains 6A,10A,16A,20A,25A,32A,40A,50A,63A. Rated voltage of 3Poles is 750VDC.
MORE
FPV-125 high breaking capacity circuit breaker is specially for solar PV system. The current is form 63A to 125A and voltage up to 550VDC. Standard according to IEC/EN60947-2.
MORE
Surge protective device, protect against lighting surge voltages in solar system( photovoltaic power supply system.
MORE
Type 1+2 DC Surge Protective Device Application: FSP-D40 is a Type 1+2 surge protector specially designed for photovoltaic power generation.
MORE
Type 1+2 DC Surge Protective Device Application: FSP-D40 is a Type 1+2 surge protector specially designed for photovoltaic power generation, it is installed at the outlet of photovoltaic panels with high risk of direct lightning strike, it is suitable for photovoltaic system protection with DC voltages of 1000V and 1500V.
MORE
FEEO FDS-32 series of DC FUSE is designed for solar system. Rated Current contains:1A,2A,3A,4A,5A,6A,8A,10A,12A,15A,20A,25A,32A. Rated voltage is 1000VDC. Breaking Capacity:33KA
MORE
FEEO FDS-32 series of DC FUSE is designed for solar system. Fuse holder(fuse base) with indicator light is used for 1A-32Amp,1000VDC.
MORE
FEEO FDIS-32 series of DC ISOLATOR(DISCONNECTOR) is designed for out door solar system. The protection level is IP66. Rated Current from 16A-32Amp,can be customized to 58Amp. Rated voltage:1000VDC. 2Poles to match 1MPPT and 4Poles to match 2MPPT.
MORE
FEEO research and development FDH photovoltaic dc isolator is mainly used solar power distribution system, namely pv junction box, etc. direct current electrical equipment. Rated voltage 1200 VDC, rated current 63 A,science of arcing design solar photovoltaic power generation system reliable operation.
MORE
FEEO research and development FDH photovoltaic dc isolator is mainly used solar power distribution system, namely pv junction box, etc. direct current electrical equipment. Rated voltage 1200 VDC, rated current 63 A,science of arcing design solar photovoltaic power generation system reliable operation.
MORE
FEEO research and development FDH photovoltaic dc isolator is mainly used solar power distribution system, namely pv junction box, etc. direct current electrical equipment. Rated voltage 1200 VDC, rated current 63 A,science of arcing design solar photovoltaic power generation system reliable operation.
MORE
